 |
| The system illustrated is used for the high-pressure cleaning of barrels and drums of the following dimensions: CLEANING PRODUCT Minimum diameter (mm): 468 Maximum diameter (mm): 600 Minimum height (mm): 700 Maximum height (mm): 850 Other dimensions also possible on request. Technical design of the system: Machine: completely of stainless steel Dimensions (LxWxH): 1200x800x2370 mm Pressure pump (if required) Washing pump: Transport capacity: approx. 15 l/min Operating pressure: approx. 150 bar Drive: Electric motor 230/400V, 50 Hz Power consumption: 4 kW Accessories on pressure side: 1 pressure regulation valve 1 manometer 0-250 bar 1 high-pressure hose with VA Fittings G 3/8” internal Cleaning head: Material: 1.4404, bushes PTFE Working pressure: up to 250 bar Nozzles: 2 to 4 Bores and brackets easily replaceable Drive: Electric motor, 56 W or pneumatic Control cabinet with swivelling operating panel CE/EU conformity FUNCTION Set the required cleaning time at the time relay, setting range: 0-10 minutes Place the container to be cleaned on the wash-stand and position the retaining device so that the safety sensor is actuated. Starting the cleaning process Press the illuminated “START” button. The button lights up green during the cleaning process when the high-pressure pump is in operation. End of cleaning The cleaning is ended at the end of the cleaning time on the time relay or by pressing the illuminated “STOP” button. The retaining device can be folded upwards, and the system is now ready for removal of the workpiece and reloading. 3-shift operation, all round the clock, with remarkably low susceptibility to faults. Other versions available on request. Simply ask us, and we can design according to your needs and wishes. Quickly, reliably, environmentally friendly and cost-effectively. |
